![Function3D](/img/default-banner.jpg)
- 99
- 206 802 094
Function3D
Spain
Приєднався 24 сер 2007
3D printing
3D printed tea lights with resin without supports on the elegoo Mars 5 ultra
STL: www.printables.com/model/951727-simple-and-cute-tea-lights-vases-with-holes
@ElegooOfficial
#elegoo #elegoomars5ultra #resin3dprinter
@ElegooOfficial
#elegoo #elegoomars5ultra #resin3dprinter
Переглядів: 1 149
Відео
Desk lamp with an orbital-mood-bridge design
Переглядів 3,1 тис.2 місяці тому
Thanks to @3dhojor31 for allowing me to test some of his matte filaments with which you get a matte finish with a better quality look than the typical shiny PLA filaments. 3D printer: @flashforge3d Adventurer 5M Side Spool conversion for Flashforge 5M: www.printables.com/model/890111-flashforge-adveturer-5m-side-spool-holder-conversi Desk lamp Gcode: www.printables.com/model/890046-desk-lamp-wi...
3D printing solving the problem of halving the size of the 48cm rod so that it could be shipped
Переглядів 6 тис.5 місяців тому
3D printing solving the problem of halving the size of the 48cm rod so that it could be shipped.
Day 6: Making a PETALOT kit#3dprinting #3dprint #petalot #recycleplastic
Переглядів 6 тис.5 місяців тому
Day 6: Making a PETALOT kit STL: www.printables.com/model/768657-petalot-plastic-bottles-into-3d-filament #3dprinting #3dprint #petalot #recycleplastic
Day 5: Making a PETALOT kit
Переглядів 4,6 тис.5 місяців тому
Day 5: Making a PETALOT kit STL: www.printables.com/model/768657-petalot-plastic-bottles-into-3d-filament #3dprinting #3dprint #petalot #recycleplastic
Day 4: Making a PETALOT kit
Переглядів 3,9 тис.5 місяців тому
Day 4: Making a PETALOT kit STL: www.printables.com/model/768657-petalot-plastic-bottles-into-3d-filament #3dprinting #3dprint #petalot #recycleplastic
Day 3: Making a PETALOT kit #3dprinting #3dprint #petalot #recycleplastic
Переглядів 5 тис.5 місяців тому
Day 3: Making a PETALOT kit #3dprinting #3dprint #petalot #recycleplastic
Day 2: Making a PETALOT kit #3dprinting #3dprint #petalot #recycleplastic
Переглядів 6 тис.5 місяців тому
Day 2: Making a PETALOT kit #3dprinting #3dprint #petalot #recycleplastic
Day 1: making a PETALOT kit #3dprinting #3dprint #petalot #recycleplastic
Переглядів 5 тис.5 місяців тому
Day 1: making a PETALOT kit #3dprinting #3dprint #petalot #recycleplastic
PET plastic bottle to 3D printing filament
Переглядів 5 тис.6 місяців тому
PET plastic bottle to 3D printing filament
Personalized reminder of birth for children's rooms #3dprinting #crealityk1 #decor #giftideas
Переглядів 1,5 тис.6 місяців тому
Personalized reminder of birth for children's rooms #3dprinting #crealityk1 #decor #giftideas
Bottle Cutter With Variable Guide, No Blades
Переглядів 28 тис.6 місяців тому
Bottle Cutter With Variable Guide, No Blades
Five PETALOT machines in a 60 by 60 centimeters space
Переглядів 8 тис.7 місяців тому
Five PETALOT machines in a 60 by 60 centimeters space
Production!! #3dprinting #3dprint #recycleplastic #crealityk1 #anycubickobra2 #SV07 #aquilad1
Переглядів 8 тис.8 місяців тому
Production!! #3dprinting #3dprint #recycleplastic #crealityk1 #anycubickobra2 #SV07 #aquilad1
Flashforge Adventurer 5M, fast and smooth, highly recommended 3D printer 👍
Переглядів 20 тис.9 місяців тому
Flashforge Adventurer 5M, fast and smooth, highly recommended 3D printer 👍
Kingroon KLP1, Core XY, full Klipper access and WIFI, lots of fun
Переглядів 8 тис.10 місяців тому
Kingroon KLP1, Core XY, full Klipper access and WIFI, lots of fun
Morning PET plastic molding #3dprinting #3dprint #recycleplastic #filament #anycubickobra2pro
Переглядів 57 тис.10 місяців тому
Morning PET plastic molding #3dprinting #3dprint #recycleplastic #filament #anycubickobra2pro
3D printing timelapse using a smartphone #3dprinting #3dprint #anycubickobra2 #anycubic #timelapse
Переглядів 5 тис.11 місяців тому
3D printing timelapse using a smartphone #3dprinting #3dprint #anycubickobra2 #anycubic #timelapse
PET POT 3D printing with plastic bottles
Переглядів 13 тис.Рік тому
PET POT 3D printing with plastic bottles
PET filament from plastic bottles #3dprinting #3dprint #recycleplastic #filament #petalot
Переглядів 12 тис.Рік тому
PET filament from plastic bottles #3dprinting #3dprint #recycleplastic #filament #petalot
Sovol SV07 - Entry-Level 3D Printer with Klipper Firmware! #sovol3d #3dprinting #3dprint #klipper
Переглядів 4,2 тис.Рік тому
Sovol SV07 - Entry-Level 3D Printer with Klipper Firmware! #sovol3d #3dprinting #3dprint #klipper
Four printers controlled with the Creality Sonic Pad #3dprinting #creality #sonicpad
Переглядів 5 тис.Рік тому
Four printers controlled with the Creality Sonic Pad #3dprinting #creality #sonicpad
Large cardboard spool, PET filament is stiff and untamable #3dprint #3dprinting #sunlut3
Переглядів 15 тис.Рік тому
Large cardboard spool, PET filament is stiff and untamable #3dprint #3dprinting #sunlut3
Reliable and cleaner method for PET filament splicing #3dprinting #3dprint #artillerysidewinderx2
Переглядів 1 млнРік тому
Reliable and cleaner method for PET filament splicing #3dprinting #3dprint #artillerysidewinderx2
How do I flatten bottles when it's not winter #3dprinting #3dprint #recycleplastic #voxelabaquilad1
Переглядів 29 тис.Рік тому
How do I flatten bottles when it's not winter #3dprinting #3dprint #recycleplastic #voxelabaquilad1
Green PET bottle complete process #3dprinting #3dprint #creality #ender5s1
Переглядів 2,6 млнРік тому
Green PET bottle complete process #3dprinting #3dprint #creality #ender5s1
FLSUN V400 - Big and fast - Can it print PET filament from recycled bottles?
Переглядів 12 тис.Рік тому
FLSUN V400 - Big and fast - Can it print PET filament from recycled bottles?
How to turn on the electronics for the first time and load the firmware
Переглядів 8 тис.Рік тому
How to turn on the electronics for the first time and load the firmware
Nearly complete process overview #3dprinting #3dprint #anycubic #anycubickobrago #creality #ender3
Переглядів 1,7 млнРік тому
Nearly complete process overview #3dprinting #3dprint #anycubic #anycubickobrago #creality #ender3
What's this grey liquid?? What type of 3d printing is this?
@@AnnkurKumar Resin 3D printing work by using a light source, like a laser, projector, or UV light, to turn different types of resin 3D printing grade into hard plastic
bro makes his own filament? thats crazy
The diameter of my filament is 2mm, does that pose a problem for printing ?????
@@emiletutoriel 2mm is just the limit of the ducts that lead the filament to the hotend so if your hotend is allmetall it will probably clog, if your hotend is PTFE up to the nozzle it will probably pass without clogging
No esperaba escuchar "La camisa negra" en un video de filamentos 3D reciclados 😂❤
Is the air inside a homemade filament made from a bottle normal or not ??????
@@emiletutoriel Of course, it can't be any other way. The filament is hollow and the air occupies that hollow because it is not hermetically sealed at any time, this is not a problem, the filament made in this way is not intended to be perfectly solid and easily overcome by increasing the flow in proportion
@@function3D thanks
can we see more of the kobra neo pleasee
@@fyndssdev This printer is the sunlu T3, and currently I no longer have it, if you really mean the Kobra neo of October 2022, I still have it but it is very outdated with respect to more current printers
@@function3D ah that is sad to hear, just got a quick question, how did you set up your Kobra Neo to accept pet filament, cause mine refuses to intake the diy PET filament i made
@@fyndssdev I haven't used the Kobra Neo for a long time, not even with PET, once I used it a lot with PET, but when I had other more reliable alternatives I stopped using it, this printer melts PET at 235°C, it doesn't need more and you have to go very slowly 30mm/s, my filaments require 120% flow or less so it is important that the filament is as solid as possible, the only modification I made is to put klipper but this is not relevant for printing PET, keep in mind that this printer has a PTFE tube in contact with the nozzle so make sure it is in good condition and tight against the nozzle
can please you share the stl of that vase from your Flashforge video?
@@robertschrauder7537 Give me a few hours to design it again since I can't find it
@@function3D thanks a lot I appreciate it
drive.google.com/drive/folders/1zNvKfrGHewpErDclPswjWaIMF34ZKQU7?usp=sharing
@@function3D it looks very similar, in the video the lines went in the other direction. still really good, thanks!
@@robertschrauder7537 mirror it
😳
What filament is this ?
@@michawasiljew6620 PET from PET plastic bottles
@@function3D impressive, quality like a standard pet filament
please send the stl of the vase, I could only find similar ones to this
Necesito hacerme una máquina de esas 😮
www.printables.com/model/768657-petalot-pet-filament-machine
Chat we got a narp narp in here🗣️🔥
He removed the bottle out of existence
So, how many cm should we cut the length of the pet bottle?
@@user-xt7ol4xk3v The width of the cut depends on the thickness of the bottle wall, as a general rule: Thickness Width 0.2mm 10mm 0.25mm 9mm 0.3mm 8mm 0.35mm 7mm. function3d.xyz/en/faqs/
@@function3D Thank you, this will really help me. Also, I really like your videos. I'm 14 years old, so I'm just learning these.
@@function3D So 1.75, how long do I need to cut it to make normal filament?
@@function3D OK, I understand now, thank you for your help.
So, how many cm should we cut the length of the pet bottle?
So, how many cm should we cut the length of the pet bottle?
what temperature should it be?
@@user-jr1nh3qi3b The temperature at which your printer melts PET
@@function3D how many degrees Celsius?
@@user-jr1nh3qi3b As many as your printer needs to melt PET, according to wikipedia PET melts at 255°C.
@@function3D ok thanks man
i have a kobra 2 neo
can you print out a water bottle out of water bottle filament?
@@lukeItsAmeMArio I can't
Nice light
How do I use past versions? Whenever I try to make something it turns into spaghetti and is, sharp???? And dosent go out sometimes it's not a problem with adhesion but is just not printing correctly it all started after I tried to print with blue silk pla and I always see what to do once I get the file on the USB but how do I get the file on the USB if you can help that would be amazing
@@EpicEruptor13 I would love to help you but I don't understand what you are saying
@@function3D I started a cube test print and it would start as normal but it would put filament out only 60% of the time and also sorta like stringing but it's the whole inside
@@EpicEruptor13 I still don't know what you need
@@function3D when printing it leaves tiny chunks when printing causing the whole thing to either mess up or semi come off the plate
@@EpicEruptor13 Repair your printer, your printer needs to be serviced and/or repaired
I assembled everything according to your instructions, but the plastic literally boils even at the minimum 150 degrees. What could be the problem?
I have built more than 60 machines and this has never happened, I have no idea what is wrong with your build, maybe your initial assumption is wrong and you need to check it
@@function3D In theory, could the temperature be displayed incorrectly?
@@user-lm5xk7ph7p If the plastic melts or boils at 150°C, you have not done things right.
@@function3D I spent half a year on the assembly and I am extremely grateful that you are answering me! Can I send you a photo of the plastic?
@@user-lm5xk7ph7p what plastic?
Great work! Just a question, could you suggest a printer to print with recycled pet filament, without any mod or hack. Out of the box?
Cool
These resin printers are so cool I think it’s important to also show the cleaning and curing process
@@maribelsoto6552 ua-cam.com/video/PX3cvWXDD4M/v-deo.html
Stl file for this
@@sandysingh0007 description
All gears on his table from this plastic😮
@@arktoriusmaximusIV I have built and sold to date 55 machines, all of them with recycled bottles, between the machines and other things I will have manufactured and printed more than 25kg of bottle filament
Do you have files for the filament maker?
@@anthonyfigueroa2395 www.printables.com/model/768657-petalot-pet-filament-machine
POV if you’re a kid: oh, so that’s what recycling is
Quien ve este video, por el tema musical, de Juanes!😂
Man loves drinking his water now 😂
@@WatchmanNz I don't buy bottles, I have been buying water for drinking and cooking for more than 20 years, only the last three years converting them into filament
vc teria pra vender
function3d.xyz/shop/
What is the thickness for the bottle strips? I'm currently making my own version but can't seem to get the right thickness
@@AntsInTheMeadow function3d.xyz/faqs/?Display_FAQ=267
How did you print long and thin elements? Which speed and other parameters?
Everything I print in this video is printed in vase mode, the stems too, the speed should be slow to give time to the material to cool down, I prefer slow to cool down little by little than cooling with the layer fan because the layer adherence decreases considerably with ventilation, the maximum speed I have configured is 3.5mm3/s but being slow layers the speed is even lower, in this printer the PET melts at 252°C
@@function3D thank you very much!
why so many people print resin in this colour ?
@@michawasiljew6620 Generally the resin is painted so it does not matter the color so a neutral color and then a white or black base is best
@@function3D I always thought resin printer it’s a printer to print small parts in different colours and put them together.
Burns up...
Excuse me. What is the ideal bottel cutting thickness and length
@@ABO-ho3rl function3d.xyz/en/faqs/?Display_FAQ=267
This can't beat the t13 bro try more better
Print a bottle
I love these new generation printers seeing how far we’ve come since my first ender 3 is incredible
That ultrasonic/rinser thing is pretty cool
Xk a mi se me parte el hilo😢😢😢??
Это уже не так интересно
👍
Nice!
I cut my fingers just watching this
I like the bottle style i need the empty bottle i will use as a water bottel 😅😅😅
I need this empty bottle 😅😅
como me podria crear una recicladora de pet
@@DJANGELOCAMPOS sigue los links de la descripción de www.printables.com/model/768657-petalot-pet-filament-machine
Where can I get such a machine?